Numerical study of flow distribution uniformity for the optimization of gradient porosity configuration of porous copper fiber sintered felt for hydrogen production through methanol steam reforming micro-reactor

A macroscopic numerical method is proposed to study the flow distribution uniformity of a novel porous copper fiber sintered felt (PCFSF), which has gradient porosities and was developed as the methanol steam reforming micro-reactor catalyst support for hydrogen production for fuel cell applications. The macroscopic porous media developed by the ANSYS/FLUENT software is used to represent the PCFSF. Our results indicate that the gradient porosity can reshape the flow distribution of PCFSFs greatly, thus producing significant influence on their performance. It is further revealed that, for a PCFSF with a determined gradient porosity configuration but different reactant feed directions, the velocity uniformity can be used as a quantitative criterion to evaluate the performance of hydrogen production. Furthermore, new gradient PCFSFs are produced according to the flow distribution of original gradient PCFSFs. The preliminary experimental results of the new gradient PCFSFs of 0.8-0.9-0.7 and 0.7-0.9-0.8 exhibit better methanol conversion and H₂ flow rate. This indicates that the numerical method can be used for the optimization of PCFSFs' gradient porosity configuration, which consists of the shape and position of the interfaces between different porosity portions, the number of interfaces and the porosity distribution in different portions.     

水下循迹航行器水动力学性能数值研究

为了研究低速水下循迹监测航行器的水动力学性能数值计算问题,采用FLUENT软件和SST剪切应力输运模型,通过雷诺时均N-S方程分析流速一定的情况下,取不同攻角、不同水平舵角作为来流条件,研究未安装推进器以及安装推进器且其安装位置不同时,航行器的升力系数、俯仰力矩系数、表面压力分布和流场速度的变化规律。结果表明:在未安装推进器以及推进器的安装位置不同时,随着攻角的变化,升力系数呈线性变化,俯仰力矩系数呈非线性变化;随着水平舵角的变化,升力系数和俯仰力矩系数呈线性变化。当推进器安装在航行器头部时,对航行器流场压力和流场速度变化影响最大;当安装在航行器尾部时,对二者影响最小。对于低速航行器,应尽量将推进器安装在中间靠后位置,以提高航行器的水动力性能。升力系数的试验结果与数值仿真结果之间最大相差7. 51%,阻力系数的试验结果与数值仿真结果最大相差5. 84%,均吻合较好。研究结果可以为低速水下循迹航行器的优化设计和发展提供理论参考。     

Using electroencephalogram to continuously discriminate feelings of personal thermal comfort between uncomfortably hot and comfortable environments

Thermal comfort is an important factor for the design of buildings. Although it has been well recognized that many physiological parameters are linked to the state of thermal comfort or discomfort of humans, how to use physiological signal to judge the state of thermal comfort has not been well studied. In this paper, the feasibility of continuously determining feelings of personal thermal comfort was discussed by using electroencephalogram (EEG) signals in private space. In the study, 22 subjects were exposed to thermally comfortable and uncomfortably hot environments, and their EEG signals were recorded. Spectral power features of the EEG signals were extracted, and an ensemble learning method using linear discriminant analysis or support vector machine as a sub-classifier was used to build the discriminant model. The results show that an average discriminate accuracy of 87.9% can be obtained within a detection window of 60 seconds. This study indicates that it is feasible to distinguish whether a person feels comfortable or too hot in their private space by multi-channel EEG signals without interruption and suggests possibility for further applications in neuroergonomics.     

热处理过程智能信息化生产调度技术

热处理是制造业中至关重要的一环,针对热处理企业的多品种变批量生产模式,合理协调车间生产资源、保障产品的质量,提高生产效率、降低生产能耗、提升企业智能化管理水平,是热处理企业亟待解决的难题。基于热处理的实际生产过程,利用物联网信息采集、异构信息数据融合、生产流程信息化管控等技术,结合生产调度遗传算法,构建了一套热处理智能化管控系统平台。通过系统平台,实现了热处理过程的生产实时调度,提高生产效率,提升热处理产品质量一致性的管控能力。     

两种多层穿梭车系统的性能比较分析

物流配送中心订单响应速度的加快,对订单拣选系统提出了更高的要求。多层穿梭车系统因其柔性强、效率高等特点,近年来得到了广泛应用。多层穿梭车系统具有两种形式--基于转载车和基于环形输送线,二者均可实现货物的快速拣选,但在系统吞吐量和订单完成周期方面存在差异,致使企业决策者难以进行系统选择。基于上述原因,本文比较两种多层穿梭车系统的性能差异。建立两个系统的开环排队网络模型,然后求解系统吞吐量、订单完成周期,通过仿真验证了排队论模型的准确性,通过试验对两种系统的性能进行对比分析。结果表明,系统吞吐量与层数、巷道数相关,层数越多,巷道数越少,转载车系统相对于环线系统优势越显著;订单完成周期与层数、订单到达率相关,层数越多,订单到达率越低,转载车系统相对于环线系统越具优势。     

Image and Feature Space Based Domain Adaptation for Vehicle Detection

The application of deep learning in the field of object detection has experienced much progress. However, due to the domain shift problem, applying an off-the-shelf detector to another domain leads to a significant performance drop. A large number of ground truth labels are required when using another domain to train models, demanding a large amount of human and financial resources. In order to avoid excessive resource requirements and performance drop caused by domain shift, this paper proposes a new domain adaptive approach to cross-domain vehicle detection. Our approach improves the cross-domain vehicle detection model from image space and feature space. We employ objectives of the generative adversarial network and cycle consistency loss for image style transfer in image space. For feature space, we align feature distributions between the source domain and the target domain to improve the detection accuracy. Experiments are carried out using the method with two different datasets, proving that this technique effectively improves the accuracy of vehicle detection in the target domain.     

掘进巷道快速过断层施工技术应用

基于四候煤矿3108回风顺槽过F3断层期间,顶板出现严重破碎、下沉现象,提出了俯斜台阶法施工工艺,并对断层破碎带顶板采取MF-2型化学材料注浆加固以及"钢筋锚索网+U29梯形棚"联合支护措施。支护效果检验结果表明,联合支护有效控制了断层破碎区顶板下沉、破碎现象,保证了巷道顶板稳定性。     

The role of Pt loading on reduced graphene oxide support in the polyol synthesis of catalysts for oxygen reduction reaction

Common carbon-blacks have shown insufficient stability as cathodic catalyst supports for proton exchange membrane fuel cells (PEMFCs). In this regard, alternative supports have been proposed and, specifically graphene or reduced graphene oxide (rGO), have attracted special attention. Herein, a set of electrocatalysts using reduced graphene oxide (rGO) as support is synthetized by a modified polyol method. The influence of Pt loading on the support is studied and compared with conventional supports, considering Pt particle morphologies and oxygen reduction reaction (ORR) performance in rotating disk electrode (RDE). Despite Pt average particle size typically increases with the Pt loading, 30 wt% of Pt on rGO is the optimal Pt loading, yielding the highest ORR activity among the rGO-supported electrocatalysts. These results show that both Pt loading and type of support greatly impact on the morphology and electrochemical performance of Pt nanoparticles.     

基于射流冲击作用的舰机适配性数值分析与优化

准确分析和控制射流冲击对航母甲板环境的影响是新型喷气偏流板设计和布局的关键所在。为了确定射流冲击影响最小的偏流板布局，运用有限体积法，采用分区混合网格方案，结合雷诺时均纳维斯托克斯（RANS）方程和SST k-ω湍流模型对喷气偏流板在不同布局下的射流冲击效应进行三维数值模拟。选取舰载机双发动机全加力状态时喷气偏流板与发动机距离不同、喷气偏流板倾角不同共12种布局组合进行射流冲击效应的对比计算,计算结果显示了喷气偏流板各布局下的流场参数、传热特性、尾喷口温升、冲击力和力矩等分布规律。定性和定量分析了燃气射流冲击下温度场和速度场的危险区域，结果表明，偏流板与发动机距离5 m、偏流板倾角45°时的布局更有利于将燃气射流向上引导。在此基础上，基于倾角最小化原则及二次导流原理优化设计了一种导流隔热性能好、工作稳定性高的被动隔热式喷气偏流板装置。